Anki Cozmo setup instruction and common problems and solutions including battery replacement.

Cozmo setup Instruction

Kindly follow the instructions to use the robot.

To play with it:

1. Connect the charger. 
2. Download the app from the App Store.
3. Place the Cozmo on the charger. (Charge the Cozmo fully before first use)
4. Go to the Wi-Fi setting on your mobile/device and connect to the Cozmo Wi-Fi using the password shown on the Cozmo's screen as shown including “-”s.
5. After connecting, go to the Cozmo app and follow the instructions.

To reset:

1. Place the Cozmo on the charger.
2. Lift the fork up and down.
3. When a different screen is shown, lift the head up and down.
4. Use the wheels to scroll and select the options from the menu.
5. Lift the fork up and down to confirm. If any issue arrives kindly try the following solutions and contact Chys Thijarah
6. for further support.

● If disconnects try to connect again.
● It may freeze if very old version devices are used. Older devices may not
maintain the normal data transfer.
● If it's tired try to feed, play games, tune up to make it active.
● If it does not connect and work properly try from another device.
● If it does not connect check you have entered the correct password and
followed instructions properly.

N.R: #1. When replacing the cube battery make sure its LR1 size and 1.5V. There are 12V and higher voltage batteries of similar size which makes confusion and using any of these will make the cube unusable permanently.