Robot Setup Help & Instructions

Need help getting started with your robot or facing an issue? Find step-by-step setup guides and troubleshooting tips below for Cozmo, Vector, Emo, Sphero, UBTECH, and more.

---

🔗 Quick Access

• Anki Cozmo Setup & Issues
• Anki Vector Setup & Issues
• Emo Robot Setup & Issues
• Aibi Robot Setup & Issues
• Sphero Setup & Issues
• UBTECH Setup & Issues
• Artie 3000 Setup & Issues
• Cubetto Setup & Issues
• Mazzy Setup & Issues

---

🤖 Anki Cozmo Setup

1. Download the "Cozmo" app (iOS or Android).
2. Charge Cozmo fully using the dock.
3. Turn on Cozmo and connect your phone to his Wi-Fi.
4. Open the app and follow the instructions.

🛠 Common Issues & Fixes

• App won’t connect: Forget and reconnect to Cozmo’s Wi-Fi. Restart the app.
• Robot not charging: Check charger cable or clean charging contacts.
• Stuck on boot: Hold Cozmo’s backpack button for 15 seconds to reset.

---

🤖 Anki Vector Setup

1. Download the "Vector" app.
2. Place Vector on charger to turn on.
3. Connect via Bluetooth, then Wi-Fi.
4. Sign in and follow activation steps.

🛠 Common Issues & Fixes

• Can’t connect to app: Reboot phone and Vector, then try again.
• Not charging: Clean charger pins and ensure cable is working.
• Not responding to voice: Check mic settings in the app or update firmware.

---

🤖 Emo Robot Setup

1. Download "Emo Pet" app.
2. Place Emo on skateboard charger.
3. Connect via Bluetooth & Wi-Fi.

🛠 Common Issues & Fixes

• Not powering on: Try long-pressing the side button or use another charger.
• Not connecting to app: Close app fully and retry after rebooting Emo.

---

🤖 Aibi Robot Setup

1. Charge fully, then open the Aibi app.
2. Connect via Bluetooth and follow setup steps.

🛠 Common Issues & Fixes

• Bluetooth not pairing: Restart Aibi and your phone. Ensure only one device is pairing.

---

🤖 Sphero Setup (BB-8, R2-D2, Spiderman, Indi)

1. Install Sphero Edu or model-specific app.
2. Turn on Bluetooth and wake your robot.
3. Select your robot in the app and follow the steps.

🛠 Common Issues & Fixes

• Not showing in app: Enable Bluetooth & Location. Restart robot.
• Disconnected suddenly: Recharge and pair again.

---

🤖 UBTECH Robots (Alpha, Meebot, uKit)

1. Download the JIMU Robot app.
2. Assemble using the 3D in-app guide.
3. Connect via Bluetooth and calibrate.

🛠 Common Issues & Fixes

• Robot not moving: Double-check cable connections.
• App not detecting robot: Restart robot and ensure Bluetooth is on.

---

🤖 Artie 3000 Setup

1. Install batteries and turn on Artie.
2. Connect to Artie's Wi-Fi from your device.
3. Open a browser and go to artie.local

🛠 Common Issues & Fixes

• No response: Check batteries and try new ones.

---

🤖 Cubetto Setup

1. Insert batteries in Cubetto and control board.
2. Use coding blocks and press play to start movement.

🛠 Common Issues & Fixes

• Not moving: Replace batteries and ensure connections are snug.

---

🤖 Mazzy Robot Setup

1. Assemble Mazzy using the instruction booklet.
2. Connect via the Mazzy app over Bluetooth.

🛠 Common Issues & Fixes

• Not pairing: Restart the robot and allow app permissions.

---

❓ Still Need Help?

If your issue isn’t listed, please contact our support team. We reply within 1 working day and are happy to assist!